Ultrasonic Cleaner for Print Head Cleaning Machine
|FOB Price:||US $13,200 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $13,200/ Piece|
|Transport Package:||Wooden Case|
|Payment Terms:||L/C, T/T, Western Union|
- Application: Heavy Trucks and Project Machine
- Tank Size: 1450*720*730mm
- Heating Power: 15kw
- Machine Type: Industrial Ultrasonic Cleaner
- Clean Type: High Pressure Cleaner
- Trademark: Sinobakr
- Origin: China
- Certification: ISO
- Ultrasonic Power: 7.2kw
- Voltage: 220V
- Fuel: Electric
- Cleaning Process: Solvent Cleaning
- Specification: CE; ISO9001
(1) Ultrasonic frequency: The lower the frequency, the better cavitation, the higher the frequency, catadioptric better. For simple surfaces should adopt low-frequency ultrasonic cleaning, for complex surfaces and deep blind hole should adopt the high-frequency ultrasonic cleaning.
(2) Power density: The power density is higher, the cavitation effect is stronger, the better the effect of ultrasonic cleaning, cleaning equipment faster. For difficult cleaning of the workpiece should adopt high power density, should be used for precision parts small power density.
(3) Cleaning temperature: Ultrasound at 40 ° C ~ 60 ° C space of the best. The higher the temperature, the better the dirt decomposition, but when the temperature reaches 70 ° C ~ 80 ° C, then it affect ultrasound play a role in reducing the cleaning effect.
(4) Cleaning time: Ultrasonic cleaning the longer the better, except for special materials.
(5) solution of (media) types: According to different targets, choosing different parameters in order to achieve the best ultrasonic cleaning effect.
How to choose the right washing machine
( 1) The power of choice
Sometimes with a small ultrasonic cleaning power, take a long time did not remove the dirt. And if the power reaches a certain value, the dirt will soon be removed. If you choose too much power, cavitation intensity will greatly increase the cleaning effect is improved, but this time more sophisticated parts also had pitting and washing machine at the bottom of the vibrating plate cavitation serious water pitting corrosion also increases, strong power underwater cavitation erosion is more serious, so according to the actual use of ultrasonic power.
( 2 ) the frequency selection
Ultrasonic cleaning frequencies from 28 kHz to 120kHz, between the use of water or clear water lotion cavitation caused by the force of physical cleaning is obviously beneficial to the low frequency, the general use of about 28-40kHz. Small gap, slit, deep cleaning of parts with high frequency ( 40kHz or more generally ) is better, or even hundreds of kHz.
With frequency proportional to the density is inversely proportional with the intensity. The higher the frequency, the greater the density washing, cleaning intensity is smaller; Lower the frequency, the smaller the density washing, cleaning the greater the intensity.
( 3 ) the use of washing basket
Small parts in the cleaning items, often used baskets, ultrasonic attenuation due to arouse mesh, paying particular attention. When the frequency is 28khz 10mm above the mesh used as well.
( 4) cleaning fluid temperature
Shuiqing lotion optimum cleaning temperature is 40-60 ° C, especially in the cold weather if the cleaning fluid temperature low cavitation effect is poor, the cleaning effect is also poor. Therefore, some of the wash tank washing machine outside the heating wire wound around the heating temperature control, when the temperature rises prone to cavitation, the cleaning effect is better. When the temperature continues to rise after the gas pressure inside the cavity increases, causing the impact sound pressure decreased, the effect will be weakened.
( 5 ) the amount of cleaning solution and cleaning determine the location of the part